Industrial 6-Axis Servo Motor CNC Robot for Bicycle Brake Lever Grinding Polishing

The DZ Automatic Loading Unloading Integrated Robotic Grinding Production Line represents the ultimate solution for manufacturers seeking lights-out automated surface finishing at production volumes exceeding 500,000 parts annually. This fully integrated system combines automated part feeding via vibratory bowl or step conveyor, vision-guided robotic pick-and-place loading, dual FANUC grinding robots for parallel processing, and automated unloading with finished part sorting into OK and rework bins. A central PLC coordinates all subsystems through Profinet industrial networking, enabling seamless material flow from raw casting input to finished part output without operator intervention.

The production line is designed for 24/7 continuous operation with automated tool wear monitoring, predictive belt change scheduling, and self-diagnostic capabilities that minimize unplanned downtime. A laser profile sensor integrated at the unloading station performs 100 percent dimensional inspection of critical features, automatically flagging parts that exceed tolerance thresholds. The system achieves consistent throughput of 300-500 parts per hour depending on part geometry and surface finish specifications, eliminating the labor-intensive manual loading and unloading operations that bottleneck conventional robotic grinding cells.

• Automated Part Feeding System: Vibratory bowl feeder or customized step conveyor orients and singulates raw castings, delivering parts to the vision-guided pick station at a controlled rate optimized for production throughput targets.
• Vision-Guided Robot Loading: A FANUC LR Mate 200iD robot with 2D vision locates each incoming part on the feed conveyor and performs pick-and-place loading into grinding fixtures with 0.05mm placement accuracy.
• Dual Parallel Grinding Stations: Two FANUC M-20iD/25 grinding robots process parts simultaneously at independent stations, each with dual sand belt machines for rough and finish grinding in a single fixturing.
• Automated Unloading and Sorting: A second vision-equipped LR Mate robot unloads finished parts and performs automated quality sorting based on in-process measurements, diverting rework parts to a separate collection bin.
• In-Process Quality Inspection: A laser profile sensor at the unloading station performs dimensional inspection of critical features, automatically flagging parts that exceed tolerance thresholds for 100 percent quality verification.
• Central Production Management: An industrial PC running DZ Production Manager software provides real-time OEE dashboards, production scheduling, tool life tracking, and maintenance management with ERP system connectivity.

Automotive component suppliers processing die-cast aluminum brackets, sensor housings, and engine accessory parts achieve round-the-clock unmanned production with consistent part-to-part quality, reducing direct labor costs by up to 80 percent. Plumbing and sanitary ware manufacturers producing brass compression fittings, stop valves, and connector bodies in annual volumes exceeding one million units utilize this system for complete surface finishing. Consumer hardware producers manufacturing zinc alloy cabinet handles, drawer pulls, and furniture fittings benefit from the ability to process multiple part variants through quick-change bowl tooling and fixture changeovers. Electronics thermal management component manufacturers processing aluminum heat sinks employ the line for automated deburring of machined fin edges with consistent quality across high production volumes.

The integrated production line undergoes complete factory acceptance testing including full-speed production simulation with customer-supplied sample parts, vision system calibration verification, and 100-hour continuous run reliability testing. The system is disassembled into modular transportable sections with comprehensive documentation including mechanical assembly drawings and electrical schematics. DZ project engineers manage the complete installation process from foundation preparation through system commissioning and production ramp-up support with operator training. The 12-month warranty covers all system components with optional production assurance service agreements providing 24/7 remote monitoring and guaranteed critical fault response.

Q&A

Q1:What types of metal parts can Dingzhu's robotic grinding and polishing systems process?
A: Dingzhu's robotic grinding and polishing systems can be used for a wide range of metal parts, including faucets, sanitary ware, valves, door handles, automotive parts, motorcycle parts, aluminum castings, zinc alloy parts, and other complex metal components. The system can be customized according to the product shape, material and required surface finish.

Q2:Can Dingzhu provide a customized robotic grinding and polishing solution?
A: Yes. Dingzhu provides customized solutions based on the customer's products and production requirements. Our engineering team can design the robot program, grinding and polishing tools, fixtures, process parameters and dust extraction system according to the workpiece. Customers can provide product drawings, photos or samples for evaluation.

Q3:What advantages does robotic grinding have compared with manual grinding?
A: Robotic grinding provides more consistent processing quality and production efficiency than manual grinding. The robot can accurately follow programmed paths and maintain stable processing parameters, while reducing repetitive manual work and exposure to grinding dust. This makes the production process more standardized and suitable for continuous manufacturing.

Q4:Which industrial robot brands does Dingzhu work with?
A: Dingzhu develops robotic finishing systems using industrial robot platforms such as FANUC and ABB. Depending on the application, we can configure the appropriate robot, tooling, fixtures and control system to meet different production requirements.

Q5:Does Dingzhu provide complete automation solutions in addition to polishing machines?
A: Yes. Dingzhu provides integrated intelligent manufacturing solutions, including robotic grinding and polishing systems, automatic polishing machines, low-pressure die casting machines and related casting automation equipment. We can also integrate loading, unloading, conveying, dust extraction and other processes to create a more complete automated production line.